Brass distribution manifolds - CD Series
The CD series manifolds are obtained from drawn brass bar with yellow* or nickel-plated finish.
All manifolds undergo a post weld heat treatment to eliminate any tension caused from processing. Do only use Luxor manifolds with Luxor accessories with soft o-ring sealing.
All of Luxor fittings and accessories for manifolds (such as drain valves, plugs, etc.) are provided with this kind of sealing and do not require the use of any intermediate element (PTFE, hemp, etc.), which could result in cracks. We recommend to tighten the fittings to a maximum torque of 60 Nm.
* In compliance with D.M. 174/2004
Max temperature
120 °C
Max pressure
10 bar
Materials
CW617N
UNI EN
12165:2016
Knob
ABS bianco
RAL 9016
Stem
AISI 316
Testing
100%
TECHNICAL SPECIFICATIONS WITH THERMOELECTRIC HEAD ART. TE
Working temperature range
0 °C ÷ 100 °C
Room temperature
0 °C ÷ 60 °C
Max relative humidity
80%
TECHNICAL SPECIFICATIONS WITH FLOW REGULATORS ART. TM 4012
Max temperature
70 °C
Max pressure
6 bar
Copper pipe
W 24x19 - TR 91
G 3/4 EK - TR 91/A
Plastic pipe
W 24x19 - TP 95
G 3/4 EK - TP 98
Multilayer pipe
W 24x19 - TP 97
G 3/4 EK - TP 99
MAIN BODY CONNECTION
G 3/4
G 1"
G 1"1/4
CENTRE TO CENTRE DISTANCE
G 3/4 | 40 mm | |
G 1" | 50 mm | |
G 1"1/4 | 50 mm |
FLOW REGULATORS AND HOLDERS
With regulators and flow meters TM 4012, adjusting and balancing manifolds allow for an immediate verification of the system’s balance by reading the flow rate. This adjustment can be locked through a block cap. The glass and the measuring spring can be disassembled for maintenance and cleaned while the system is operating. This kind of manifold must be installed on the inlet.
LOCKSHIELD VALVE
Adjusting and balancing manifolds (lockshield type) feature a double micrometric adjustment with memory of position in case of temporary shutdowns and can be mounted both on inlets and outlets of the system.
CONVERTIBLE HEADWORK
The tightening device on the stem of the manifolds with built-in valves for thermoelectric adjustment can be inspected and replaced while the system is operating. The control stem is in AISI 316 stainless steel and its tightness is ensured by two peroxide cured EPDM o-rings.
CD 474
G 1” x G 3/4 EK
10, 11, 12, 2, 3, 4, 5, 6, 7, 8, 9
CD 1474
G 1” x (W24x19)
10, 11, 12, 2, 3, 4, 5, 6, 7, 8, 9
CD 448
G 1” x G 3/4 EK
10, 11, 12, 2, 3, 4, 5, 6, 7, 8, 9
CD 449
G 1” x (W24x19)
10, 11, 12, 2, 3, 4, 5, 6, 7, 8, 9
CD 1446
G 1” x G 3/4 EK
10, 11, 12, 2, 3, 4, 5, 6, 7, 8, 9
CD 1466
G 1” x (W24x19)
10, 11, 12, 2, 3, 4, 5, 6, 7, 8, 9
CD 473M
G 1”1/4 x G 3/4 EK
Nickel plating
CD 478M
G 1”1/4 x (W24x19)
Nickel plating
CD 468M
G 1” x G 3/4 EK
Nickel plating
CD 465M
G 1” x (W24x19)
Nickel plating
CD 1877
Yes
G 1”1/4 x G 3/4 EK
CD 1879
Yes
G 1”1/4 x (W24x19)
CD 477
Yes
G 1” x G 3/4 EK
CD 479
Yes
G 1” x (W24x19)
CD 1873
G 1”1/4 x G 3/4 EK
Nickel plating, Yellow
CD 1878
G 1”1/4 x (W24x19)
Nickel plating, Yellow
CD 473
G 1” x G 3/4 EK
Nickel plating, Yellow
CD 478
G 1” x (W24x19)
Nickel plating, Yellow
CD 2877
Yes
G 1”1/4 x G 3/4 EK
CD 2879
Yes
G 1”1/4 x (W24x19)
CD 2477
Yes
G 1” x G 3/4 EK
CD 2479
Yes
G 1” x (W24x19)
CD 2873
G 1”1/4 x G 3/4 EK
Nickel plating, Yellow
CD 2878
G 1”1/4 x (W24x19)
Nickel plating, Yellow
CD 2473
G 1” x G 3/4 EK
Nickel plating, Yellow
CD 2478
G 1” x (W24x19)
Nickel plating, Yellow
CD 1869
Yes
G 1”1/4 x G 3/4 EK
CD 1867
Yes
G 1”1/4 x (W24x19)
CD 469
Yes
G 1” x G 3/4 EK
CD 467
Yes
G 1” x (W24x19)
CD 1868
G 1”1/4 x G 3/4 EK
Nickel plating, Yellow
CD 1865
G 1”1/4 x (W24x19)
Nickel plating, Yellow
CD 468
G 1” x G 3/4 EK
Nickel plating, Yellow
CD 465
G 1” x (W24x19)
Nickel plating, Yellow
CD 2869
Yes
G 1”1/4 x G 3/4 EK
CD 2867
Yes
G 1”1/4 x (W24x19)
CD 2469
Yes
G 1” x G 3/4 EK
CD 2467
Yes
G 1” x (W24x19)
CD 2868
G 1”1/4 x G 3/4 EK
Nickel plating, Yellow
CD 2865
G 1”1/4 x (W24x19)
Nickel plating, Yellow
CD 2468
G 1” x G 3/4 EK
Nickel plating, Yellow
CD 2465
G 1” x (W24x19)
Nickel plating, Yellow
CD 3865
Yes
G 1”1/4 x G 3/4 EK
CD 3863
Yes
G 1”1/4 x (W24x19)
CD 3462
Yes
G 1” x G 3/4 EK
CD 3460
Yes
G 1” x (W24x19)
CD 3864
G 1”1/4 x G 3/4 EK
Nickel plating, Yellow
CD 3862
G 1”1/4 x (W24x19)
Nickel plating, Yellow
CD 3461
G 1” x G 3/4 EK
Nickel plating, Yellow
CD 3459
G 1” x (W24x19)
Nickel plating, Yellow
CD 100
G 1” x G 3/4 EK
Nickel plating, Yellow
CD 101
G 1” x (W24x19)
Nickel plating, Yellow
CD 869
Yes
G 1”1/4 x G 3/4 EK
CD 870
Yes
G 1”1/4 x (W24x19)
CD 2474
Yes
G 1” x G 3/4 EK
CD 3474
Yes
G 1” x (W24x19)
CD 867
G 1”1/4 x G 3/4 EK
Nickel plating, Yellow
CD 868
G 1”1/4 x (W24x19)
Nickel plating, Yellow
CD 882
Yes
G 1”1/4 x G 3/4 EK
CD 881
Yes
G 1”1/4 x (W24x19)
CD 1448
Yes
G 1” x G 3/4 EK
CD 1449
Yes
G 1” x (W24x19)
CD 880
G 1”1/4 x G 3/4 EK
Nickel plating, Yellow
CD 879
G 1”1/4 x (W24x19)
Nickel plating, Yellow
CD 874
Yes
G 1”1/4 x G 3/4 EK
CD 873
Yes
G 1”1/4 x (W24x19)
CD 2446
Yes
G 1” x G 3/4 EK
CD 2466
Yes
G 1” x (W24x19)
CD 872
G 1”1/4 x G 3/4 EK
Nickel plating, Yellow
CD 871
G 1”1/4 x (W24x19)
Nickel plating, Yellow
CD 446
G 1” x G 3/4 EK
Nickel plating, Yellow
CD 466
G 1” x (W24x19)
Nickel plating, Yellow
CD 878
Yes
G 1”1/4 x G 3/4 EK
CD 877
Yes
G 1”1/4 x (W24x19)
CD 3446
Yes
G 1” x G 3/4 EK
CD 3466
Yes
G 1” x (W24x19)
CD 876
G 1”1/4 x G 3/4 EK
Nickel plating, Yellow
CD 875
G 1”1/4 x (W24x19)
Nickel plating, Yellow
CD 865
Yes
G 1”1/4 x G 3/4 EK
CD 863
Yes
G 1”1/4 x (W24x19)
CD 462
Yes
G 1” x G 3/4 EK
CD 460
Yes
G 1” x (W24x19)
CD 864
G 1”1/4 x G 3/4 EK
Nickel plating, Yellow
CD 862
G 1”1/4 x (W24x19)
Nickel plating, Yellow
CD 461
G 1” x G 3/4 EK
Nickel plating, Yellow
CD 459
G 1” x (W24x19)
Nickel plating, Yellow
CD 861
Yes
G 1”1/4 x G 1/2
CD 457
Yes
G 1” x G 1/2
CD 860
Yes
G 1”1/4 x G 1/2
CD 456
Yes
G 1” x G 1/2
CD 451
Yes
G 3/4 x G 1/2